Stop losing money!

Turn OFF & ON your
RIGS/ ASIC remotely

ZEUSRIG: TELEGRAM WATCHDOG POWER DISTRIBUTION UNIT (TWD-PDU)

Stop losing money!

Turn OFF & ON your
RIGS / ASIC remotely

ZEUSRIG: TELEGRAM WATCHDOG POWER DISTRIBUTION UNIT (TWD-PDU)

Super Easy, Use the telegram app to send commands to your ZeusRIG.

Everyone that has a GPU RIG or ASIC miner knows that sometimes it freezes. Until now, the only way to reboot the rig remotely is by using software such as SMOS, HIVEOS or NICEOS. Now, when the operating system is completely frozen the only solution is to physically go there and reboot the power for the RIG manually. As a result this means time for you, and time means money.

BUY NOW

Subscribe and Pre-order at 30% off

Access Launch offer

We are launching on Kickstarter, check it now!

ZeusRig models

We have 2 models avaliable: ZeusRig (S) and ZeusRig (M).

ZeusRig S

· Wi-Fi connection avaliable
· Powered via USB cable
· Watchdog compatible via USB

ZeusRig M

· Wi-Fi & Ethernet connection avaliable
· Power from input A. Embedded AC/DC
· Watchdog compatible via USB
· Internal sensor temperatures
· Possibility to connect up to 8 external node temperature

Node Temperature (ZeusRig M Accessory)

· DIP switch to choose address from ID1 to ID8
· LED address indicator
· Easy to install with double sided tape
· Temperature range: -50ºC to 125ºC

1x Power Supply Rig Setup

Average Setup

This is the most common mining RIG setup.

MAIN PROBLEMS
Once the Rig completely freezes you have to reboot the power manually. As a result, you loose time and money.

ZeusRig S Setup

Recommended for mini farms
with 1-4 RIGS, or for RIGs built with inexpensive GPU.

ZeusRig M Setup

Recommended for farms or RIGS
built with expensive GPUs.

ZEUSRIG SETUP ADVANTAGES
· Isolate each rig from any short circuit from the other with independent switch breakers embedded into each zeusRIG
· The ZeusRIG protects your mining rig from power surges.

2x Power Supply Rig Setup

Average Setup

This is the most common mining RIG setup.

MAIN PROBLEMS
Once the Rig completely freezes you have to reboot the power manually. As a result, you loose time and money.

ZeusRig S Setup

Recommended for mini farms
with 1-4 RIGS, or for RIGs built with inexpensive GPU.

ZeusRig M Setup

Recommended for farms or RIGS
built with expensive GPUs.

ZEUSRIG SETUP ADVANTAGES
· Isolate each rig from any short circuit from the other with independent switch breakers embedded into each zeusRIG.
· The ZeusRIG protects your mining rig from power surges.

Connection options

The zeusrig s conntects to the internet using wifi. The zeusrig M allows connection to the internet via Ethernet or wifi.

ZeusRig Specs

ZEUSRIG SPECS

Input Voltage:110/220 VAC
Max Input current (per input):16A
Max Output current (per input):16A
Range Temperature:-25 to 70ºC
Ethernet:10/100 Mbps
Wi-Fi:IEEE 802.11 b/g/n
Switch Breaker (per input):Dual pole 16A
USB:2.0A

1 – LAN Internet connection (only ZeusRig M)
Connect your zeusrig M to the internet via ethernet for a better connection.

2 – Temperature Sensor (only ZeusRig M)
View the temperature from each GPU with the our Node Temperature monitor. When the device detects that the temperature is decreasing this indicates that the gpu has frozen. Our ZeusRig M model is designed to reboot the power of your mining rig automatically.

ZeusRig M: Supports up to 8 Node Temperature monitors.
ZeusRig S: Not compatible with Node Temperature..

NODE TEMPERATURE SPECS

Input Voltage:5 Vcc
Range Temperature:-50 to 125ºC
Num Address Max8ºC

3 – USB
ZeusRig S: The Zeusrig s is powered by USB. 
ZeusRig M: The zeusrig M comes with the AC/DC adapter built into the zeusrig M.

Also, you can use the USB cable to connect to your PC in both models to upgrade the ZeusRig firmware or to connect it to thr Watchdog program. To update the firmware, you can download the release to your computer and update the zeusrig via usb connection. ZeusRig can also monitor the system via usb and in the event of a complete freeze, it can reboot the power independently.

4 & 5 – Switch Breakers
Both ZeusRig models provide you with complete protection. Each output is protected by one 16A switch breaker and one varistor to remove surge voltage and protect all your power supplies and GPUs.
The individual switch breakers will protect your complete farming rig from being totally down in the event of one short circuit as each mining rig has its own breaker built inside the zeusrig. Also, it will prevent fire cases caused by overcurrent in the power supplies or short-circuit in the power supply input cables.
The varistors will Procter your GPUs: it’s well known that surge voltage can pass through the power supply and damage your GPUs.

6 & 7 – Connector C13
Connects to the power supply of the rig or the ASIC miner

8 & 9 – Connector C13
Connects to the mains power line.

Features

Remotely turn OFF & ON

This feature function of the ZeusRig is its ability to remotely turn off and on the electrical power supply to the rig or asic miner. The ZeusRig is specifically designed for use to completely reboot the power when your mining OS has frozen. When this happens the ZeusRig will power OFF & ON remotely using a simple command with the chatbot on Telegram.

Watchdog S

With the ZeusRig S model, the unit is already connected via USB to the PC. If you are using a Windows PC it is recommended to install the watchdog software V2.3 (or above). Once the ZeusRig is connected to the Windows PC via USB and the watchdog software is installed and running, when the system detects the PC is frozen the ZeusRig will automatically power OFF and power ON on your RIG.

Wi-Fi

The ZeusRig is Wi-Fi enabled. Connect your ZeusRig to any Access Point/Router to start sending orders to your ZeusRig.

Remotely turn OFF & ON

This feature function of the ZeusRig is its ability to remotely turn off and on the electrical power supply to the rig or asic miner. The ZeusRig is specifically designed for use to completely reboot the power when your mining OS has frozen. When this happens the ZeusRig will power OFF & ON remotely using a simple command with the chatbot on Telegram.

Watchdog M

The ZeusRig is compatible with the USB WatchDog V2.3 (and above) software for Windows. Once the ZeusRig is connected to the Windows PC via USB and the watchdog software is installed and running, when the system detects the PC is frozen the ZeusRig will automatically power OFF and power ON on your RIG.

Wi-Fi & Ethernet

The ZeusRig Model M comes with both Wi-Fi and Ethernet connectivity. Connect your ZeusRig to any Access Point/Router to start sending orders to your ZeusRig.

GPU controlled by Temperature

With ZeusRig M, you can monitor up to 8 GPUs in order to check the current temperature. If one GPU freezes, the temperature will go down, this is when the ZeusRig M will power OFF and power ON your RIG automatically in order to save you money.

Contact us

info@zeusrig.com